Close
Search
Filters
Dark grey Cedral weatherboard and accessories kit covering 19.43m2. Usually sold for £1450.57 + VAT!
Availability: 1 in stock
SKU: 105639

Dark grey Cedral weatherboard and accessories kit covering 19.43m2.

Kit includes:

  • Cedral weatherboard lap classic: Fibre cement weatherboard cladding with a woodgrain finish. 3.6m x 190mm x 10mm, x 34.
  • External corner profile: For use with Cedral click systems. Installed vertically on 90° external corners of a builds where the click planks are required either side of a corner. 3m x 26mm x 31mm x 31mm x 26mm x 34mm, x 4.
  • Start profile: Used with the Cedral weatherboard lap system to create a 'kick-out' along the first bottom run of cladding as well as above windows and doors. 3m x 30mm x 30mm x 9mm, x 4.
  • Cedral weatherboard perforated closure trim (inset mesh): Used to cap off all openings above and below windows/doors to prevent anything nesting or building up in the air flow gap behind the Cedral weatherboarding. 2.5m x 30mm x 40mm, x 4.
  • Stainless Steel Countersunk Screws: For fixing Cedral fibre cement weatherboards in the Lap system. 4.2mm x 4.5mm, x 400 piece.
  • Colour matched screws: Used along the top run of boards, around windows and on bridge lap vertical installs wherever fixings are on show. 4.2mm x 45mm, x 200 piece.

Each Cedral weather lap board requires a 30mm lap on installation giving a cover width of 160mm per board. Each board will therefore cover 0.576m2 each. Alternatively please allow 1.75 board per m2.

Dark grey Cedral weatherboard and accessories kit covering 19.43m2.

Kit includes:

  • Cedral weatherboard lap classic: Fibre cement weatherboard cladding with a woodgrain finish. 3.6m x 190mm x 10mm, x 34.
  • External corner profile: For use with Cedral click systems. Installed vertically on 90° external corners of a builds where the click planks are required either side of a corner. 3m x 26mm x 31mm x 31mm x 26mm x 34mm, x 4.
  • Start profile: Used with the Cedral weatherboard lap system to create a 'kick-out' along the first bottom run of cladding as well as above windows and doors. 3m x 30mm x 30mm x 9mm, x 4.
  • Cedral weatherboard perforated closure trim (inset mesh): Used to cap off all openings above and below windows/doors to prevent anything nesting or building up in the air flow gap behind the Cedral weatherboarding. 2.5m x 30mm x 40mm, x 4.
  • Stainless Steel Countersunk Screws: For fixing Cedral fibre cement weatherboards in the Lap system. 4.2mm x 4.5mm, x 400 piece.
  • Colour matched screws: Used along the top run of boards, around windows and on bridge lap vertical installs wherever fixings are on show. 4.2mm x 45mm, x 200 piece.

Each Cedral weather lap board requires a 30mm lap on installation giving a cover width of 160mm per board. Each board will therefore cover 0.576m2 each. Alternatively please allow 1.75 board per m2.

aaaaaaaa           

          aaaaaaaaaaaaaaaaa

                Laker Builders Merchant © present  |    All Rights Reserved    | Website Design, Hosting & Maintenance by Vital-tel.com

aaaaaaaaaaPowered by nopCommerce