Close
Search
Filters
2.1m A standard/medium duty cavity wall lintel is designed to fill the width of the cavity between two layers of building materials to support the framed structures.
Manufacturer: Birtley
Availability: Out of stock
SKU: 100124

2.1m A standard/medium duty cavity wall lintel is designed to fill the width of the cavity between two layers of building materials to support the framed structures. - 2.1 For 90-105 Cavity - 100mm inner leaf - 100mm outer leaf.

A standard/medium duty cavity wall lintel that is designed to fill the width of the cavity between two layers of building materials to support the framed structures.

Made from mild steel with a hot dip galvanised zinc coating to prevent rusting and corrosion which offers more life expectancy. Fire rating of 60 mins with a 2 coat plaster finish. Lack of a baseplate and factory fitted insulation reduces thermal bridging.

Installation requirements: Bed fully on bricklaying mortar. must be used with a cavity tray on external walls only. 150mm minimum end bearing. Not suitable for point loads or concrete floors.

With structural grade steel to EN10025.

Measurements:

  • Length: 2100mm.
  • Height: 132mm.
  • Material Gauge: 2mm.
  • Weight: 17.451 kg.
  • Loadbearing Capacity: 20kN.
  • Other sizes available.

    2.1m A standard/medium duty cavity wall lintel is designed to fill the width of the cavity between two layers of building materials to support the framed structures. - 2.1 For 90-105 Cavity - 100mm inner leaf - 100mm outer leaf.

    A standard/medium duty cavity wall lintel that is designed to fill the width of the cavity between two layers of building materials to support the framed structures.

    Made from mild steel with a hot dip galvanised zinc coating to prevent rusting and corrosion which offers more life expectancy. Fire rating of 60 mins with a 2 coat plaster finish. Lack of a baseplate and factory fitted insulation reduces thermal bridging.

    Installation requirements: Bed fully on bricklaying mortar. must be used with a cavity tray on external walls only. 150mm minimum end bearing. Not suitable for point loads or concrete floors.

    With structural grade steel to EN10025.

    Measurements:

  • Length: 2100mm.
  • Height: 132mm.
  • Material Gauge: 2mm.
  • Weight: 17.451 kg.
  • Loadbearing Capacity: 20kN.
  • Other sizes available.

    aaaaaaaa           

              aaaaaaaaaaaaaaaaa

                    Laker Builders Merchant © present  |    All Rights Reserved    | Website Design, Hosting & Maintenance by Vital-tel.com

    aaaaaaaaaaPowered by nopCommerce