Brett Martin

Inspection Chamber Base 450mm dia. 5 Inlet (inc. 3 Plugs) is perfect for 110mm drainage layouts, ensuring your property complies with Building Regulations Part H1.

The Long Radius Plain End Bend (87.5 Degree) 110mm is a plumbing and drainage system component allows for a secure and stable connection to other pipes and fittings

110mm low trapped gully is designed to capture foul smells and gases from sewers and prevents them from escaping. This is achieved by allowing a pool of water to form below the gully outlet, acting as a barrier against the bad smells.

110mm oval rodding points give easy access to your underground drainage system so obstructions and blockages can be easily removed and cleaned.

Plain ended pipe is a staple part of our underground drainage range.

PVC to clay flex couplers is a step adaptor which is used for connecting a PVC and clay pipe together, for a quick and simple repair on an existing drainage system.

PVC to PVC flex couplers are used for connecting two PVC pipes together, or for a quick and simple repair on an existing drainage system.

The Black square Hopper and Grid 160 x 110mm is a drainage system component that combines a hopper and grid for easy installation. It's made with durable materials for long-lasting use.

Round black Gutter connecter that changes the direction of guttering at a 135° angle.

Round black Gutter connecter that changes the direction of guttering at a 90° angle.

A 68mm round black downpipe with a 112.5° bend used to create swan necks to change the direction from a downpipe outlet to the wall.

A 68mm round black downpipe branch with a 122.5° bend allows you to connect two 68mm round downpipes from different angles and have the rainwater drain into one gully or drain.

68mm x 2.5m Black round downpipe is designed to drain rainwater from roof gutters to a drainage system.

68mm x 5.5m Black round downpipe is designed to drain rainwater from roof gutters to a drainage system.

A 68mm round black downpipe with a 95.5° bend used to change the direction of the pipe and water drainage.

Black round bracket for securing 68mm downpipes.

A 68mm round black downpipe connector is used to connect two downpipes together or to other parts of the guttering system.

A 68mm round black downpipe shoe is fitted to the bottom of a downpipe to direct water out towards a drain or gully.

68mm x 4m Round black gutter is designed to collect and channel rainwater away from the roof and the foundation of the building.

A 112mm round black external gutter Stopend is used to cap off the end of a gutter run.

A 112mm round black internal gutter Stopend is used to cap off the end of a fitting, such as union's, outlet's, or angle's.

A 112mm round black gutter running outlet is used connects two half round gutters together and provides an outlet for a 68mm round downpipe.

A 112mm round black gutter union bracket connects two half round guttering together.

The Round Integral Hopper and Grid 110mm is a drainage system component that combines a hopper and grid for easy installation in 110mm pipes and for efficient water flow.

A 110mm clay spigot adaptor is used for connecting salt glazed clay pipes together.

Single Socket Access Pipe in Black (BS410B) with tow boss connections.

Single Socket Triple Boss Pipe (BS445B) in Black is easy to install with a push fit system